[H8r]

MY bio says Alpine, UT. His doesn't but the pic looks like a typical house in Mexico, that's why I ask.

At all......i have nothing against mexis but id hate to live up there. Im in Colombia, Medellín to be precise. And i work inside cuz sun is heavy these days

installed my gsxr speedo sensor using a ghetto bracket xD but cant test it until this upcoming morning so im going to sleep NOW
Also i put the r6 throttle tube and adjusting those cables was a real PITA. I needed to pull off the TB so i could adjust those nuts.

 

[StrigaMort]

Weird to think of Mexico as "up there"...

This board is truly international!

 

[fafaforza]

Finally took off my clubmans I used for the track and installed handlebars. The change in position feels weird.

 

[snlsmith]

Picked up my son's parts from the powdercoater:

This is what I saw when we pulled up:

p/c'd wheel next to a stock wheel

Misc bits

Rear wheel with sprocket carrier

 

[OfirMX]

Wow, can't wait to see that bike put together!

 

[blackoutt]

Changed the oil, tested out the new powerstands econo rear stand, installed carbon fiber look tank pad, carbon fiber look belly pan, and carbon fiber fender extender. Still have to do my front tire, wheel bearings, and zx-14 shock.

 

[mopar2]

Bought her a new Battery Tender pigtail!

 

[B12]

Today I tried to replace my shortened (and way too loud) Leo Vince cans with some stock mufflers from a local, very nice guy. Unfortunately they did not fit, maybe they were off a TL? Who knows. Anyway, the search continues.

 

[mattman912]

i have my stock muffler sitting in my garage if you want it. its cut off without the midpipe though :-\. you can have it for shipping just cause its taking up too much space.

today i bought a new to me cylinder head for the front cyclinder. all because of a broken exhaust bolt.

 

[brett.]

checked sprockets and adjusted my chain for the first time.
just got done with a new diy paint job. i used black truck bed liner on the gas tank and rear body assembly. should toughen it up to my belt and other metallness. plus with the recent addition of the delkevic mini it needed to look a little more like the devil and a little less like the cookie monster. though i was considering googly eyes.

 

[OfirMX]

Installed my new tank cover.

 

[H8r]

Rode it!!! it feels nice the r6 throttle tube after last nite nightmare installing throttle cables. Still, i cant figure how or what should i adjust to get the proper play as it is now is like .8mm instead of 2-4. Any tips will be appreciated.

 

[H8r]

Installed a 08 R6 MC, aluminium res (got it from knifemaker some time ago) SS lines and now im about to ride a moment

 

[yoohoo]

Installed my cig lighter plug so I can charge my phone and gps. Then gave her a once over before I head up to Chattanooga in the morning.

 

[Dstritt]

Installed my new Penske shock today.

Pics here.
http://www.svrider.com/forum/showpost.php?p=2453257&postcount=182

 

[mikat309]

Installed a shiny new black hugger on my naked Blue. Hope that it will protect the Hotbodies FE which has gotten chewed up a little bit. I bought a few SS washers to use as spacers as well as to cover the big mounting holes in the hugger. Didn't want the fiberglass to crack on the first ride this evening.

 

[yoohoo]

Built two support brackets to help with the Givi windscreen flopping in the wind. I made them with 1/4 alu rod.

 

[mikat309]

By the way, Dstritt, about 70 and sunny here in Gilbert AZ today. Glad I relocated, more riding time here than western NY!

 

[sultan]

finally changed the oil, last change was in may :hiding2:


also started it up with the oil cap off, it was rather amusing.

 

[mattman912]

payed a dude on here for my k&n air filter. tomorrow im going to cycle gear to get some fluids. mostly just fork oil and watter wetter if they have either of those.