[killakhan]

EXHAUST WRAP FTMFW.

http://www.designengineering.com/ca...dei-cycle/motorcycle-exhaust-pipe-wrap-kits/titanium-exhaust-wrap-lr-technology

no need to wet, made of lava rocks ... wtf.

 

[JPL_SV]

New rear tire: Pirelli Diablo supercorsa sp 180.
New oil and oil filter: AMS oil full syn.
Clean and detail bike, degrease chain lube and residue.
Custom mount brake resivor with new setup.
fabricate a block plate/trim for front mask.
Test ride. ;D

 

[Daimler-Maybach]

Installed gsxr front end with new springs, r6 calipers with brembo mc and braided lines, and an ohlins rear shock... The difference is extraordinary!

 

[JPL_SV]

Installed gsxr front end with new springs, r6 calipers with brembo mc and braided lines, and an ohlins rear shock... The difference is extraordinary!

I remember the difference when I did my GSX-r forks and shock, it was like riding a real race bike compared to the 4 years or so I spent on the un-altered stock suspension. ;D I wish I had an ohlins shock... Lucky! Post up some pics.

 

[taylor192]

Sonic 0.95 front springs, 15W oil to match the ZX14 rear shock installed last weekend. Bike feels incredibly different, love it!

 

[ForzaSV]

changed the oil and filter.

 

[jelyk]

Went and stared at her, again. Been sick as a dog for over a week now. Toss me a bone, Spring.

 

[JSmith319]

Rode it until my stomach said, "Get your ass to the throne!"

 

[ricracer16]

Rode over to Floyd Bennett Field and shook down the bike with some quick and short power runs to check everything. Didn't go over board with anything. I had to adjust the speedo sensor because it was just knicking the magnet.

Now going back out to get a bite to eat in the North Side of Bklyn.

 

[sdobbs20]

changed the oil and filter. pulled top triple and bars off again to reroute some cables and wiring. put some blue zip ties around front brake lines and speedo line. torqued triple clamps, steering stem head nut, brake caliper bolts, axles, and bar clamp mounts.

 

[marco-polo]

Drilled out a stuck bolt, then installed adjustable pegs (Lockhart Phillips V360 Superpoles - I think that I might have bought some of the last ones.)

 

[flyboy556]

Rode it to work then took the long way home. lol its great evening weather here tonight

 

[JTstyle]

Put the feshly painted plastics back on, washed her and rode it for an hour.

 

[sdobbs20]

after it died every time i pulled the clutch in or put in neutral on the way to class today, i finally made it home and adjusted the idle. i think someone f'ed with it yesterday. it ran great for a few mintues until it reached op temp and auto enrichener shut off, then it would die unless i was on the throttle with clutch in. got the idle dialed in now.

 

[TomServo]

Bled front brakes (so easy with speed bleeders), adjusted the clutch lever, synced the throttle bodies, adjusted chain slack.

 

[mad8vskillz]

failed at installing a zx10 shock (with 45* reservoir instead of 90)

 

[DrummerDaveB]

Put my rats-nest of wiring stuffed behind my dominator headlights into a project box.
Looks much cleaner. The box unfortunately wont fit behind the headlights and so looks a little odd, but at least it cleaned it up a lot.

 

[BirchyBoy]

Measured/cut the spacers for new springs, went to put the new fork oil in only to find out the bottle I bought had been opened and put back on the shelf

 

[BKK Jack]

Note to Self: Check fluid container integrity before buying.

Thanks for the tip, although I'm sure that wasn't your intention. :thumbsup:

 

[Walo]

Yesterday I installed 3 items produced and sold by members of this forum: Steve's aTRE, mrk66's QR tank pins and seat cover set, and Bighammer's tank grips. I'm very happy with all 3 and recommend anyone on the fence about any of them to bite the bullet and go for it.