^ thats a suzuki gel seat IIRC

 

Wrecked it saturday... no major damage... mostly plastics.

 

took mine up to the hills today

 

i finnished up my solo seat project , cover in place of the passenger seat. I just had to disgard the mounting hardware, it would have closed off my "glove compartment" with my warm winter gloves and the access to my battery tender hook up. I had to make the brackets adjustable and then i had to make them really trick looking/lightened with milled out sections.

 

Prepped it for my trip to Boise, Idaho. I leave tomorrow...

 

Installed my R6 throttle tube. No test ride yet, but initial impressions are very positive.

 

I washed my bike. Will clean chain friday.

Looking forward to this Sunday ocmoto.com ride. 79 bikes through Santiago Canyon and Live Oak Canyon (Trabuco), where I ride every weekend.

Was going to end at a park for a bbq but instead going to go to a Ruby's in So Laguna Beach.

 

Cleaned and oiled the chain, looking forward to Sunday!!! smiley

 

Went to the ocmoto.com group ride this morning. 103 bikes, was a very organized ride, a couple of SVS, a lot of GSXR and Yamahas, Hondas and Kawasakis, Ducatis, 1 Aprilia and one HD Nightster. Had a great time.

http://s469.photobucket.com/player....hotobucket.com/albums/rr55/buyt_me/Noobie Ride 10/NooBRide10.flv&fs=1&os=1&ap=1

See if you can spot me!

 

Rode it to work, then to martial arts.

 

Took my bike shopping!;D I'm currently looking for a '04+ GSX-R front. The project continues...

 

Waxed her. Did the Chain cleaning and oiling, the oil change and the washing of her earlier in the week.

 

guys from motoskin came by and installed venture shield clear bra

then i found out the hard way that you can't use goof off on the windscreen, so i had to paint it

 

guys from motoskin came by and installed venture shield clear bra

I'm interested in a clear protective "bra" for my bike after it gets painted. How much was it and can this be installed by yourself? Bike looks good.

 

Broke off the left corner of my zero gravity double bubble.

Must have picked up a rock or two and this was just what was coming. It has seen a lot of miles.

 

I had a LeoVince High Mount SO, Clear Alternatives Integrated Tail light and Fender Eliminator installed. Done modding for a while.

 

Ninja EX500 adjustable clutch lever (cut and shortened, then sanded to match the stock brake). Looking for someone who snapped a brake lever so he/she can give it to me, and I can scavenge it for a shorty to see how I like it before commiting to Pazzo's. Patiently waiting for the 2 Bros CF exhaust I scored in the SVR ads...

tk

 

PM Me. I think I still have the OEM levers from my ASV swap. The brake has a little rash, but it sounds like you will amputate that part anyway.

 

Rode her 200 miles.

 

Finally got my new barend mirrors on. WooT!!!
Buh-bye to the fugly stockers.

Now I'm just waiting for that box from Oneida to arrive...

 

Rode her 30 kilometers with a broken shifter and then fixed the shift lever with duct tape, krazy clue, and a washer bolt ... and re-used the rubber from my broken shifter.

Oh... and put carbon fiber bar end mirrors on... so much nicer than not having any mirrors..

 

cleaned and lubed the chain, washed and waxed

 

Pulled the baffle out of the Leo Vince. (Not as easy as I thought it would be). Ahhh, what a sweet melody she make a now. Mamma mia.

 

Put the ZX14 shock on last night, washed it this morning and then went for a 65 mile shake down run. Quite the difference in the rear end! I need to do the front ASAP!

I also did a mod that will get me at least a billion more HP and top speed of 627 mph! What is it you ask? Well, you know those 2 wires that go to the clutch switch, the ones with the yellow stripe on them, I always hated how they looked "unfinished". All the other wires have heat shrink on them and those 2 sticking out don't! So, I put some heat shrink on them and they look way better! So at least 627 mph!

 

I also did a mod that will get me at least a billion more HP and top speed of 627 mph! What is it you ask? Well, you know those 2 wires that go to the clutch switch, the ones with the yellow stripe on them, I always hated how they looked "unfinished". All the other wires have heat shrink on them and those 2 sticking out don't! So, I put some heat shrink on them and they look way better! So at least 627 mph!

I can beat that... I bridged out the connector ages ago after the switch broke... But it annoyed me to have that wire still there. So a while back, I traced the wires back into the main loom and removed the whole section, saving about 3 feet of wire and at least 10 grams

 

Huh. That's weird. They were finished on mine; s'pose the factory just didn't finish it?

 

That is weird! It just bugged the crap out of me that those 2 wires just dangled there. The hardest part was getting the connectors out of the plastic plug so the heat shrink would slide over them!;D

 

mine weren't sheathed either.

 

cussed... alot. cant find replacement bulbs for my aftermarket signals(and if i could im not 100% sure i could get them in without breaking them)

 

installed my hotbodies undertail. looks so much better than stock. now im just waiting on my M4 pipe to arrive. cant wait!

 

Applied the carbon fiber suzuki stick-on to the top crown. The last one i needed now the set is complete... +5HP :vroom: at least.