[sdobbs20]

fixed my left front signal, it's got a bad connection on the wires from them being too short and stretched.

 

[gone3uo6]

Ordered a Superlite Steel Sprocket Conversion Kit & a red EK 520MVXZ Chain from Sprocket Center. Front 15 & Rear 44 (stock).

Also ordered the following from Motorcycle Superstore...

• EBC - Organic Front Brake Pads
• EBC - Organic Rear Brake Pads
• Motul - 5100 Ester/Synthetic Engine Oil
• Emgo - Standard Oil Filter

I plan to get some NGK plugs, 15w fork oil, .90 Sonic springs, and a zx14 rear shock next.

 

[JollyGQ]

repaired the power lead to my horn relay

 

[Apollo1777]

The ducati rear caliper FINALLY came in the mail yesterday, hopefully I can install it today. Also a few days ago I received the spare/track tank I bought off of ebay, VERY happy with it - it has only 2 chips in the paint and no dents. Wootwoo! ;D

 

[omari]

Put on motosliders a couple weeks ago.
Put on a RAM GPS mount and took of the grab rail on Wednesday.
Yesterday night I put on the Leo Vince high mount exhaust with the help of svrider's Algreen.

 

[08sv]

pulled the tank,air box, and fairing off . gettin it ready to do yet another shim check.
A tad overdue @ 32k. Got a feelin this go round she is gonna want some different shims.
Then drank a brew and made this .....

Since I couldn't find one of these for sale.

Then i rode the kawi around and this thing seems to help people see me. So, now i'm not just another "punk on a bike" anymore.

 

[zabrow187]

Not my SV but my girlfriends. We removed her lowers and all the fairing stays, ordered frame sliders and a new front and rear tire.

 

[omari]

Upgraded frontend suspension
Racetech emulators
PJ1 20W Fork Oil
.85 Sonic Springs

Feels great

 

[noitsacardigan]

lol at that half-life 2 looking helmet. You would definitely have my attention if you rode by wearing that, so awesome

 

[SuaveNotion]

cursed at it and my apparent poor tuning skills. Scheduling a dyno run today to get the A/F chart so i can see what's going on.

 

[C-10 Aldehyde]

reinstalled the lower fairings after doing the fork swap. had to dremel off some of them to clear the new forks lower tripple clamp bolts.

 

[bri_con]

Removed the plate mount, rear fender, and turn signals to get ready for my new integrated tail light. Still not sure where to re-mount the plate

 

[barwell1992]

fitted the straightened disc's and brembo's

 

[2Zukis]

Stripped and cut up a used passenger seat I bought recently. Fitted a Givi universal adaptor plate to it, and took it to have the thing recovered. Then I cut the handles off of the passenger grab rail so I can affix the seat with it's (removable) Givi top box to the bike.
The top box will fit via the modified passenger seat, flush with the tail of the bike and it's weight distributed directly over the rear axle. I'll be able to ride to work with my duty belt, gear, and lunch now..... then remove it and return my other passenger seat in place when I want to ride with nothing on the bike.

Pictures to follow..... when I get the recovered seat back Monday.

 

[rabbie303]

Since my SV is new, I drove it to work for the second day Gotta get on the mod-wagon and hook up my baby.

 

[hikeit]

Bought it.
'07 naked with 11,850 miles, 3800 buckaroos. Yay!
I can't wait to pick it up next weekend, and will just have to tool around on the Ninja 'til then
(can't add an image yet, i'm too new here... but if its still there, http://nh.craigslist.org/mcy/1834317564.html)

 

[sdobbs20]

made my ghetto camera mount, it mounts to the mirror arm with a u hook and a beveled clamp and some bolts. when i first put it together it was at a real sharp angle, so all pictures or video would be angled, so i pulled the u hook off again, clamped it in the vise, and tapped only 1 end of the hook with a hammer, bent it just enough that i was able to keep the same beveled clamp and it made the mount level.

also, tried putting on a vista cruise control but it just doesn't hold the grip tight and allow the throttle tube to snap shut without adjusting the nut for it every time. i'll figure it out later but i am a little disappointed in it.

 

[NineseveN]

Put on some Techspec snake skins, installed an Evotech fender eliminator and some Shogun bar end sliders. Waiting on my MotoSliders for the frame and my T-Rex stands with spool/swingarm sliders to show up next week so I can install them to and be done for the season.

 

[C-10 Aldehyde]

Fitted my Cortech Sport bags n top pack today with my homebrewed saddlebag support.

Yes they are fully loaded so I could get a feel for how they would affect the ride.
Here is the mount I made with my walmart stick welder and 6 bucks in bar stock

]

Ignore my gorilla welds. They are ugly but strong like ox.

 

[sagvr4]

lots of cleaning because a rockstar can got punctured in the tail and dripped and got flung absolutely everywhere