Just thought this would be a cool new topic. If there is already one in existence please let me know so I can delete this one, or a mod can do it. As for me I finished my under tail project and rode the crap out of it.
What did you do to your SV today? (mods, farkles, maintenance, etc)
2 reading
On1wheel01
5,421 - 5,440 of 15,883 Posts
Joined
·
470 Posts
Changed the oil and oil filter for the first time. I don't think it had ever been done on the bike because it was blacky black. Bought the bike with around 6700 miles on her and I've added less than 1,000 miles in a 6 month timeframe. Daily commute is 10 miles roundtrip. I also ordered a Puig Double Bubble, should be at the front door in a couple days. ;D
Joined
·
832 Posts
LOL its actually really nice today though, at least in philly.....
but all i did today was go in the garage and glance at mine.... no time to ride, too much work
Joined
·
4,104 Posts
did you do the switchable aTre?
Joined
·
587 Posts
http://www.facebook.com/photo.php?pid=3269443&l=d3d4650bb0&id=530550731
put a SRAD rear shock in her. YES!!
Joined
·
5,816 Posts
Facepalm at Facebook links.![Image]()
http://www.facebook.com/photo.php?pid=3269443&l=d3d4650bb0&id=530550731
put a SRAD rear shock in her. YES!!
Joined
·
832 Posts
you know you can embed those normally right? rightclick on one, get the path of the image itself, then throw it in with img tags rather than url....![Image]()
http://www.facebook.com/photo.php?pid=3269443&l=d3d4650bb0&id=530550731
put a SRAD rear shock in her. YES!!
Joined
·
595 Posts
write:
this requires that you upload the image to something like imageshack or have it on facebook (if you can get a full url with the *.jpg ending.)
The IMG tag is what you put around your link -> [ IMG ] www.somesite.com/picture.jpg [ / IMG ]
Take out the spaces, make sure you have the path to the image itself, so something ending in .jpg, .gif, .png etc.
Take out the spaces, make sure you have the path to the image itself, so something ending in .jpg, .gif, .png etc.
Joined
·
3,539 Posts
Take out all the spaces in the above example and you'll see a pic instead of your link wrapped around w/IMG tags.
Joined
·
595 Posts
Can dielectric grease be used on the spark plugs to prevent water and such? Remember reading about some type of grease that would help.Rode through a 6" river acrossed the road.
Should have picked a better speed, played submarine!
Both plugs stayed lit!
Joined
·
563 Posts
Installed the TRE (non-switchable), filled up with 3.1 gallons, and rode just a few miles. Didn't get much time to ride today since I was working on fixing all the jacked up work the previous owner of my house did in one of the bedrooms we're going to use as a nursery.
Still looking to get the TPS adjustment done. I need to get out and clean a bit of rust off the lower triple and polish the forks. The whole bike needs a good cleaning. Probably time to clean/lube the chain and possibly adjust it.
Never done the chain adjustment before, I'll have to search for a video how-to.
Still looking to get the TPS adjustment done. I need to get out and clean a bit of rust off the lower triple and polish the forks. The whole bike needs a good cleaning. Probably time to clean/lube the chain and possibly adjust it.
Never done the chain adjustment before, I'll have to search for a video how-to.
Joined
·
832 Posts
Joined
·
9,801 Posts
Sat on it and made vroom vroom noises like a little kid
Joined
·
384 Posts
Lost a screw and spacer (1 of 2) for my Ride Engineering fender eliminator. So i just removed the one remaning screw and spacer...off to Home Depot tomorrow to try to find a pair that will work. Maybe I'll move the license plate elsewhere and do something custom with the turn signals....hmmm...
5,421 - 5,440 of 15,883 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
