Suzuki SV650 Riders Forum banner
3,701 - 3,720 of 15,883 Posts
But what happens when you drop your 1/2" drive socket wrench on one of those tiles?
You bust up the tile and replace it! ;D

Actually if the tile was set with a real good bed of mud then the chance of busting a tile with a drop is less then if the thin set was spread to "thin".
 
Bought some TechSpec pads, got prepped to do some body work tomorrow or Sunday, and found out that the screw that holds the horn to the frame vibrated out, and my horn has just been hanging loose for some unknown number of miles.
 
But what happens when you drop your 1/2" drive socket wrench on one of those tiles?
I've dropped a few things on them and they've held up pretty good. They are laid on concrete though so there is plenty of support underneath there, no risk of them bending to the point of cracking as if they were laid on top of plywood.


As far as keeping it clean, it's a piece of cake, I just use a pressure washer that I use to clean my car and it takes care of the whole thing!
 
Went for a ride in the rain to ACH with 10 other ocmoto guys today.

I'm heading home on the 91 Fwy and people are hitting the brakes. I hit my brakes and they lock-up, I'm kinda sliding sideways like a speedway bike. Thought I might hit the car in front of me but was able to let off the brakes and throttle enough to stand me back up and I split the lane and went on my merry way, lol. ;)

I bet the guy behind me thought I was going to crash. :p
 
Finally got it registered. After 3 weeks and 1,700mi I fianlly have plates ;D
Previous owner and I didn't know that in his state the seller has to have his sig noterized, so I had to mail the title back to him and wait for him to mail it back.

I also got my garage cleaned up so I can pull the motor on my 02 on Sunday.
 
I got some goodies for my SV. :)

Image
Ordered the Ricors for mine yesterday.Went to my favorite shop to see if they had a shock.Found out one of the techs died hours after I seen him Monday.Four freinds of the shop have died this year.I`m sad today.Was hoping to go on i ride I posted,now I almost hope nobody shows.
 
I was finally able to install the .85 Sonic Springs. They feel great, the bike feels much more stable, I didn't realize how bad it actually was untill now. One thing thats worrying me though is the cotter pin on the bottom of the fork cap interferes with the pvc spacer because the its so thick. I could hear it scraping it as I turned the preload adjuster. I realize now I should have taken a picture...but has anyone noticed this cause it seems like it would cause uneven pressure around the top of the spring...plus when you turn the preload its shaving off the pvc which could get into the dampening port and maybe even clog it.
Anyways aside from that I also got my seat back from Spencer with the LD option...it feels greattttttt. And I also put on a pair of grip puppies...the extra grip feels good, I'm happy with them. So overall a great day of upgrades!
 
My new Bridgestone BT-021 tires arrived at my door step so I'll have them put on Monday. Went for a 88 mile trip with a friend and my brother in law through the Kettle Moraines, also saw a number of riders out as we have races here at Road America this weekend.
 
Went for a ride in the rain to ACH with 10 other ocmoto guys today.

I'm heading home on the 91 Fwy and people are hitting the brakes. I hit my brakes and they lock-up, I'm kinda sliding sideways like a speedway bike. Thought I might hit the car in front of me but was able to let off the brakes and throttle enough to stand me back up and I split the lane and went on my merry way, lol. ;)

I bet the guy behind me thought I was going to crash. :p
Locked up my brakes today too eddiemon.

Didn't see a stopsign as it was hiding behind a tree, behind a curve, with no "Stop Ahead" sign. Pulled out of the slide still upright, but something caused my gearshifter to transform into a gearshitter, and now it will not shift. Yay!

Then stood by the side of the road for two hours in the dark waiting for the tow :mad:
 
this morning i installed my new HotBodies dark smoke wind screen on my 2003 copper 1000.

next week(thurday) im picking up the lower full fairing for it, so the sex factior will be going up haha...i dont have any pics to post at the moment but ill try to get some in the near future.

i just got the bike so thats the only mods for this season...over the winter i want to put a better header on and maybe a sprocket change.

Image


Image



this is is when i was forced to rip it all apart...
Image


so i could fix this...
Image
 
Just got done putting on front forks with Traxxion Dynamic springs and Emu, and a rear 06 zx14 shock . . .OOOHHHHHHH YEAH. M4 Exhaust is nxt in a couple weeks;D
 
i put on these stickers ;p

Image


im pretty sure ill be taking them off tomorrow
What's so special about these stickers. I've seen a few people with them but I have no idea if the R refers to something that was done to the bike or if it's just for style... Someone clarify my noobness please!
 
Installed Intiminators (upgrades front forks) for those who don't know
New set of tires (Dunlop Roadsmarts)
And new shock (ZX-14) from a '09

Rode the bike a little bit....can't wait till next week (tuesday to be more exact) to actually test everything as I'll be doing a long ride.
 
3,701 - 3,720 of 15,883 Posts