Just thought this would be a cool new topic. If there is already one in existence please let me know so I can delete this one, or a mod can do it. As for me I finished my under tail project and rode the crap out of it.
On1wheel01
DIY TRE mod
Fixed my FI light by finally installing the 10K ohm resistor for the PAIR removal
Borrowed a friends laptop too look at the PCIII map. I figured something with the PCIII must be causing the surging at 2-3K RPM. Found the setting at 2250 RPM with throttle position of 2 was -75! Freaking -75!
Bike runs a lot better after todays mods.
Although it hated the 105 degree weather. Spat up some coolant after shutdown.
Fixed my FI light by finally installing the 10K ohm resistor for the PAIR removal
Borrowed a friends laptop too look at the PCIII map. I figured something with the PCIII must be causing the surging at 2-3K RPM. Found the setting at 2250 RPM with throttle position of 2 was -75! Freaking -75!
Bike runs a lot better after todays mods.
Although it hated the 105 degree weather. Spat up some coolant after shutdown.
Cleaned & lubed the chain, finished off a set of Pilot Powers. Road Attacks coming next. 3 fronts and 4 rears a year is costing more $$$ than it's worth...
just finished re building my clutch.
after I low sided it and burned out my clutch riding it in 3rd gear about 15 miles ~_~
after I low sided it and burned out my clutch riding it in 3rd gear about 15 miles ~_~
Rode it to work this morning. Wow is it a completely different ride compared to my usual ride to work on the XT 
Then I'm meeting the husband after work to load it onto the trailer to go play at Barber tomorrow
Then I'm meeting the husband after work to load it onto the trailer to go play at Barber tomorrow 
a little chain/sprocket cleaning/lubing. It sure needed it. And since it was our 2 year anniversary, I made her breakfast in bed (aka garage).
got pulled over today on the SV. DougZ need that license plate bracket quick. Cop said "get it fixed...today"
Put in new fork springs, oil, and ZX10r special edition shock (the black/silver one). Rode it after the new fork springs/oil and it was a HUGE improvement, even with the preload all the way out (haven't adjusted the sag yet). Now that I finally got the rear shock on, looking forward to taking it for a spin.
Rode for about 2 hrs. Not very many miles, just out riding. Took a couple of pics then headed home. Got rained on for about 10 minutes but was dry 10 minutes later....thats Eastern NC humidity for ya.
Hit the 100 mile mark, changed the oil and filter. Techspec Snakeskins arrived the other day, so I put them on today as well.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
