Suzuki SV650 Riders Forum banner

Torque settings on forks and clamps

3310 Views 6 Replies 6 Participants Last post by  svsuperninja
Could someone please tell me what the torque settings are for the fork caps and the 3 per side triple clamp pinch bolts (1 upper and 2 lower) on my K7n?

Thank You
1 - 7 of 7 Posts
pinch bolts are all 16.5 ftlbs for my gsxr forks. not sure about the fork caps.
They are all 16.5 ft lbs.
When in doubt, it's almost always 23nm ;D
On the double pinch bolts on the lower triple, make sure you go back and forth tightening them up. If you do one and then the other, the first will not have enough torque.
...and don't forget to recheck all of them after a good shakedown ride.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top