[frezon]

Hi all,

I've been driving one of these little wonders for a year now and like it a lot. I have the unfaired version and I find it a bit to "windy" for my liking. So I decided to convert it to an SVS. Until now I have collected every item I need for the conversion, except for the headligt mounting nuts and screws. For some reason they aren't in the ronayers fiche for the SVS.

Could someone post a picture or give any advice to what I should use to mount the headlight inside the cowling, and also to mount the headlight to the cowling bracket? I have been searching the internet to find any info on this, but have found nothing so far.

I'm getting the cowling back from the painter this week and I would really like to finish the conversion soon, so please help!

 

[DieTrying310]

Do you have any pics by chance?

 

[frezon]

I borrowed a pic from another post. I need both the nuts and bolts for all the mounts.

 

[VARIABLE9]

You need to look at other pages of fiche for the S model lights and cowling.

For example, there are 6 Bolts here on this page:
http://fiche.ronayers.com/Index.cfm...oup/HEADLAMP_(SV650SK3/SK4/SK5/SK6/SK7/SAK7)_

There are a variety of other clips and fasteners here:
http://fiche.ronayers.com/Index.cfm...up/COWLING_INSTALLATION_PARTS_(WITH_COWLING)_

Here is my write up for the N to S conversion, there is even a picture with all the cowling fasteners shown with labels to what they are, feel free to ask questions there:
http://forum.svrider.com/showthread.php?t=84789

 

[frezon]

Double post...

 

[frezon]

You need to look at other pages of fiche for the S model lights and cowling.

For example, there are 6 Bolts here on this page:
http://fiche.ronayers.com/Index.cfm...oup/HEADLAMP_(SV650SK3/SK4/SK5/SK6/SK7/SAK7)_

There are a variety of other clips and fasteners here:
http://fiche.ronayers.com/Index.cfm...up/COWLING_INSTALLATION_PARTS_(WITH_COWLING)_

Here is my write up for the N to S conversion, there is even a picture with all the cowling fasteners shown with labels to what they are, feel free to ask questions there:
http://forum.svrider.com/showthread.php?t=84789

Thanks! Your conversion thread helped a lot.

I have been looking at those fiches before, but I always wondered wether the bolt for the headlight was actually the mounting bolt, but looking at the numbers I realize I need 6 of them: i.e. the number to mount the headlight. Why didn't I see this before?! :BangHead:

From the pictures in your thread I conclude that there are at least two sizes of nut clips for mounting the cowling. One of them (small) is for those coarse threaded PH screws (no 4 in fiche). And I guess that the other ones (no 5 in fiche) the same as for mounting the headlight in the cowling?

 

[VARIABLE9]

Could be, I know there are two sizes but can't recall what goes where without disassembly. Good luck