[kicsibors]

anyone know how to fit a 94-97 or 98+ vfr swing arm on a 1st gen? thanks

 

[swiest152]

94-97 ( 4th gen ) yes

98+ ( 5th and 6th gens ) no

 

[kicsibors]

i read your earlier thread on this topic, you mentioned you'll do a write up of 94-97. how did that work out? is it better than the 90-93? you still have to grind down the bosses on the frame?
also, have you tried this mod on 2nd gen or sv1k?

last question. do you know if it is possible to uuse the 98+ swingarm?

thanks man

 

[swiest152]

94-97, need to reweld the sv linkage mount from the stock arm onto the vfr arm. Then either machine the swing arm to fit stock exhaust or get a rear header made to go around the swing arm. I believe you have to take some off the bosses to center the wheel.

No and No and anything is possible.

 

[kicsibors]

thanks man!

and i like that way of thinking!

No and No and anything is possible.