Suzuki SV650 Riders Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
449 Posts
Redrill the large holes that are already there, making them larger. Not sure of the size though, you might want to ask TWF. Also you can use JB weld to braze the tiny bleed hole in the top half of the rods. De-burr the drilled holes and any left over residue from the JB weld; install.

Grav.

PS. The hardest part about this mod is getting those damn damper rods out. Can be very difficult without an impact wrench.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top