Suzuki SV650 Riders Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
64 Posts
Discussion Starter #1 (Edited)
I currently have a 2006 SV650S with a 2007 GSXR 750 front end. I'm looking for some race bodywork that I won't have to cut to accommodate the handlebars/radial master cylinder. I was really interested in the Armour Bodies bodywork, but I heard the radial MC will hit the windscreen area.

Here are pictures of clearance with the stock bodywork.

MC with bars at full left lock.


MC with bars at full right lock.
 

·
Registered
Joined
·
64 Posts
Discussion Starter #3
No, it's not hitting the stock bodywork at all. I just want to make sure the race bodywork I purchase won't have to be cut.
 

·
King of D'bags
Joined
·
3,579 Posts
IIRC, Armour Bodies stuff replicate the OE pieces. If that's the case then you should be fine.
Are you keeping the inner fairing trim panel?
 

·
Registered
Joined
·
392 Posts
Armor bodies is good product. Do not think they make it SV specific though. I believe you can use their GSXR body work. Or you can go Sharkskinz which is SV specific. My choice.....Sharkskinz. On a side note, there is really no need to keep the plastic to the upper. Just gets in the way......
 
1 - 9 of 9 Posts
Top