[dubtecv2]

I've been doing research on bar ends. I took mine off a long time ago in lieu of bar end mirrors, and have since lost them.

I'd like something a little heavier than stock to help with vibes (yes, the throttle bodies are synced). I've heard of a few people using Hayabusa bar ends, but they don't seem to include the expanding rubber and associated hardware. Oneida Suzuki lists different part numbers for '98-'07 'busa and '08+ 'busa...what's the difference?

• GSX1300 '98-'07 #56200-08830 $13.50/ea (two req.)
• GSX1300 '08 #56200-15830 $25.99

Let's say I don't want to acquire the expander and stuff separately...here are other OEM Suzuki offerings that might fit. Can anyone confirm/deny? Anyone know their weights?

• GSX1300BKK B King #56200-23830 $34.40
• '01-'05 GSF1200 Bandit #56200-27860 $18.50
• DL650 V-Strom/SV1000 Naked #56200-16840 $22.99
• SV1000S #56200-04821 $14.50
• '02-'03 DL1000 V-Strom #56200-06841 $23.99
• '04-'08 DL1000 V-Strom #56200-06861 $32.50

We can't leave out the SV bar ends:

• '99-'02 SV650 Naked #56200-32822 $11.99
• '99-'02 SV650S #56200-04821 $14.50
• '03-'08 SV650 Naked #56200-16821 $18.75
• '03-'08 SV650S #56200-16831 $21.99

Note the difference in prices as well as part numbers, even in the SV model range!

 

[eaglefrq]

I don't know anything about most of these. I can tell you the difference in the S vs N versions for the OEM. The N's have a much shorter screw than the S version. I would say it's at least 2" shorter.

I have the SWATT's clip-on's and I got bar ends from him as well. I like them and think they do a good job.

 

[SDRider]

I took mine off when I put my bar end mirrors on. Can't say that I really noticed much of a difference...

 

[billbillw]

The first gen N parts cost more because the set includes include the nuts and rubber expander that holds them inside the hollow bar ends. The 1st gen S models only come with the weight and a screw. The fist gen stock clip-ons are solid with a threaded hold on the end. I guess the 2nd gens are both hollow and the S model is more expensive.

Also wanted to mention, I'm not sure if you can buy the weight part alone from the dealer. They only seem to come as a set.

 

[dubtecv2]

Anyone else?

 

[scuffedSV]

if your close to a suzuki dealership you could go down and see what they have in stock to compare weights. i got some plastic ones that were labeled to fit svs and gsxrs, witch i didn't relize were plastic till i got home. i can't tell the difference but thats probably because the bike was missing one when i bought it.