Suzuki SV650 Riders Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
So I got in a collision and the bike is mostly just fine but the shift lever and assembly broke off. There is one from a 2003 sv1000. Mine is an 02 sv650 S. Are these compatible?


Sent from my iPad using MO Free
 

·
Registered
Joined
·
2,607 Posts
By assembly, are you referring to the rod and shift spline knuckle?

IIRC, the 03 650 shifters are compatible with 1g. On the 03 650, the shift knuckle was situated below the shaft like on the 1st gens vs above the shaft like with the 04+ 650. If the 03 1000 is the same design, it SHOULD be compatible... however the rods may have too great of a difference in length.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top