[blkvwgolf]

hey all!! I am in the prosess of designing some fully ajustable rearset plates and I need some help.. I am looking for the actual mounting hole position and size for first and second gen bikes. Basically were the stock rearsets mount up with the frame, how far in from the edge and how far apart are the mounting points? Any info would be appreciated.
Thanks,
Mark

 

[GHM]

I would also like some information on this.

Anybody?

 

[03_silver_sv]

I'll take some pics and measurements of my 2nd gen SV when I get back from my bike trip to Quebec. But I'm packing tonight and leaving at 4am tomorrow, so I'll be hitting the sack early.

 

[thejimdaddy]

center to center bolt pattern (i believe, i'll double check tommorrow) for a 1st gen is 2.250, i'll get other measurements later, if you have access to a Cad program i can send you an IGES file of a design for the 1st gens

 

[chewy22]

Someone has already made them (adjustable) for the second generation SV Cant remember the site but it?s in www.sv1000.zyns.com somewhere. I sell them for this bike but not adjustable.