Suzuki SV650 Riders Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
9,376 Posts
You may be able to sand and polish back to normal. If you do buy the bike, you could start with wet/dry 600 sandpaper using soapy water and work your way up to 1000, 2000 and finer. The plastic will appear opaque. Then, use a cutting agent such as clear coat polish, plexi polish or even toothpaste, rub until the plastic is crystal clear. If the brake fluid damage isn't too deep, this may work. Same procedure for restoring headlights on cars and bikes that oxidize with age.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top