Suzuki SV650 Riders Forum banner

How do I use my impact wrench

1303 Views 14 Replies 9 Participants Last post by  eisenfaust
Hey Guys,

I am trying to use my impact wrench on the three bolts that hold the carb bowl into place. I just sprayed some liquid wrench on it, and am ready to use my wrench.

On my wrench there is a silver dial(?) that moves.

and I am not sure if with the impact of the hammer the springs move in the same direction or opposite directions after each impact. Like the first blow it will turn left, and the next blow It will turn right.

here is a picture of my wrench

My working outside

Top two Bowl bolts
See less See more
1 - 1 of 15 Posts
+1 don't put those cheesy screws back in there.
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.