[v-tec maz]

hey guys
my bike runs crap so im doing a carb cleaning/rebuild. It has a Jardine exhuast with midpipe and thats it. what jets would you recomend? im not looking to squeeze every last hp out, just so it runs fine.
thanks

 

['86meesta2]

140 mains 17.5 pilots. I've got 142.5's in now and it ran good, untill it started to warm up around here. I'm at sea level, so the 142.5s gave it a little extra fuel, but the Florida heat causes it to run rich so I'm about to switch to 140's.

edit: Ive got a micron slipon and midpipe, similar to your setup

 

[v-tec maz]

thanks, how many turns on your screw?

 

['86meesta2]

2.5 turns, and 1 shim on the needles

 

['86meesta2]

Oh btw this site helped me- idk if you've been there or not but its a great resource
http://www.geocities.com/catpoopman/Johns_bike.html

 

[scooterdude]

I followed catpoopman's advice on jetting and it worked out fine. I just have a two brothers slip on but I did also cut out the airbox which helped out the breathing. If you're pulling apart everything, make sure you get all the o-rings replaced while you're there. My bike runs fantastic. Good luck.