Suzuki SV650 Riders Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 2008 that sat for a long time. Needless to say there was rust and old ass gas. Took the tank off, cleaned it up, took the fuel pump apart and cleaned it. Now I’m having issues with the fuel pump priming. It’s getting power and the relay clicks. Any ideas?
 

·
Registered
Joined
·
34 Posts
I just cleaned out my fuel pump, replace the screen, and somewhat cleaned the sealed filter. So no fuel pumps out the line that goes to the throttle bodies? I pumped my fuel out using a small container through the main line. It was a bit foggy. I drained everything and cleaned the tank. I did replace the pump with an after market for about $45.

The pumps are on ebay.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
After taking the fuel pump apart I notice 2 of the 3 wires has rusted off so I made new connectors and reattached them. Pump is still not working so now, instead of just the pump, I need the complete assembly. Just ordered it.
 
1 - 3 of 3 Posts
Top