[capachkid]

I am sure we have covered this before but, how much different is the front F3 rim? Is it possible to have matching rims? Anyone ever done this?

 

[BossMan]

Do you have the stock forks or gsxr?

 

[furyskater911]

no idea; wanna be the first to find out?

 

[capachkid]

stock forks

 

[BossMan]

Ok the bearings for the F3 front wheel are 20mm id as opposed to the 17mm id of the SV. So you'll need either new bearings (I don't know if you can get them with a 17mm id) or else a sleeve made. Then you'll need to measure the disc spacing, and make sure you can get the right diameter rotors, then figure out a way to mount the speedo.

My guess is it's not worth it.

 

[wcj]

What's the deal with them on GSXR forks?

 

[BossMan]

What's the deal with them on GSXR forks?

The gsxr axle is 25mm so that won't work either.

 

[gregg-k]

What's the deal with them on GSXR forks?

The earlier GSXR USD forks have a 20mm axle.

.. Gregg

 

[BossMan]

The earlier GSXR USD forks have a 20mm axle.

.. Gregg

How early we talking? pre-srad?

 

[gregg-k]

How early we talking? pre-srad?

I was talking about the 1991 to '95 period.

.. Gregg

 

[echoanalog]

icarus put the whole f3 front end on:

http://www.svrider.com/forum/showthread.php?p=476687