[sbbsnewman]

Hope this might help someone. after a week of following wires and such, I for some reason messed with kickstand switch and thats where the problem was. it sends power to ecm to tell injectors to fire. Hope this might save someone time.

 

[Lischynski]

It's FI by the way, but I have had the **** FI code for a while, and it's starting to **** me off. It's either because the previous owner did a PC for the new exhaust and the bie "thinks" something is wrong, or it's because of my ****** relay in the back.

 

[Spierings]

It's FI by the way, but I have had the **** FI code for a while, and it's starting to **** me off. It's either because the previous owner did a PC for the new exhaust and the bie "thinks" something is wrong, or it's because of my ****** relay in the back.

Put it in dealer mode and get the malfunction code.

 

[Lischynski]

Put it in dealer mode and get the malfunction code.

I'm betting I'm gonna get C32, but I don't know how to do it (I know where to do it) or what to do about it.

 

[Spierings]

I'm betting I'm gonna get C32, but I don't know how to do it (I know where to do it) or what to do about it.

If you are getting the c32 malfunction code disconnect the pcIII and check if the malfunction come back. On a 07 it's a commen thing with the PCIII.
http://forum.svrider.com/showthread.php?t=73604

 

[Lischynski]

Thanks. I'll try to see what I can do. I will update in this thread.