Suzuki SV650 Riders Forum banner

Did I get a deal on this f3 wheel, and what else do I need?

929 Views 8 Replies 6 Participants Last post by  Reaper
I'm pretty excited at the price I just got my f3 wheel for on ebay. Check it out here http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=320334716852

I know this is asked all the time, but I also see different answers given along with some confusing/vague posts by other members. What else do I need (besides svracing's spacers) to run this wheel?

Thanks in advance.
1 - 9 of 9 Posts
Uhhh.... You got a killer deal. You got the wheel, tire and rotors for less than the cost of the new rubber. well done.
Re: Did I get a deal on this F3 wheel, and what else do I need?

I'm pretty excited at the price I just got my F3 wheel for on ebay. Check it out here http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=320334716852

I know this is asked all the time, but I also see different answers given along with some confusing/vague posts by other members. What else do I need (besides svracing's spacers) to run this wheel?

Thanks in advance.

:) You don't need anything besides my wheel conversion kit, but You are missing the Sprocket carrier and cush which you will want to get,

I may be able to help you out on that as well,

Email me directly at [email protected] and I will look after you right away,

Send me a contact number and I will give you a quick call briefly discuss the set up with you,

Enjoy the ride, and best regards,
Blair
See less See more
Re: Did I get a deal on this F3 wheel, and what else do I need?

I just wanted to let anyone who reads this know that Blair at svracingparts is an awesome guy, and really went out of his way to help me out. Thanks again for the help Blair, I'll definitely be a returning customer for anything else I need.
I'm interested in doing this swap too, besides the wheel its self and the spacer kit what all do I need?
Do you reuse the sv650 rotor and sprocket?
A list would be nice if anybody could help me with that.
I'm interested in doing this swap too, besides the wheel its self and the spacer kit what all do I need?
Do you reuse the sv650 rotor and sprocket?
A list would be nice if anybody could help me with that.
There is most likey a list here somewhere, Searching for it would benefit you.

Found this in 20 seconds.
Re: Did I get a deal on this F3 wheel, and what else do I need?

I'm interested in doing this swap too, besides the wheel its self and the spacer kit what all do I need?
Do you reuse the SV650 rotor and sprocket?
A list would be nice if anybody could help me with that.

:) Hi, You need the complete F3 Wheel, including rotor, Sprocket Carrier, Cush Rubbers, and you are looking for a wheel that comes complete with the bearings still in place.

Make sure it is actually a 5 inch F3 wheel not an F2 wheel,

Besides this, all you need in my F3 Rear Wheel Conversion Kit which will provide you everything you need to be able to bolt the F3 right on, as if it were OEM, and be able to swap it back and forth with the OEM SV wheel as if both were OEM, No issues at all,

Email me at [email protected] and let me know if your SV is Gen 1, or Gen 2 and I will provide you with everything you need to complete the swap.

Let me know whenever you are ready, and I will look after you right away,

Everything is in stock and ready to ship,

Enjoy the ride, and best regards,
Blair
See less See more
Re: Did I get a deal on this F3 wheel, and what else do I need?

:) Hi, You need the complete F3 Wheel, including rotor, Sprocket Carrier, Cush Rubbers, and you are looking for a wheel that comes complete with the bearings still in place.

Make sure it is actually a 5 inch F3 wheel not an F2 wheel,

Besides this, all you need in my F3 Rear Wheel Conversion Kit which will provide you everything you need to be able to bolt the F3 right on, as if it were OEM, and be able to swap it back and forth with the OEM SV wheel as if both were OEM, No issues at all,

Email me at [email protected] and let me know if your SV is Gen 1, or Gen 2 and I will provide you with everything you need to complete the swap.

Let me know whenever you are ready, and I will look after you right away,

Everything is in stock and ready to ship,

Enjoy the ride, and best regards,
Blair
Thank You!
I'll shoot you an email when I get one!
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top