[Tiger1]

I'm converting my s into a track only bike.  How do I remove the kickstand switch so I can still start the bike?

 

[{PMS}fishy]

Just close the circuit.

Jump the two wires.

 

[vimkgt]

What would happen if somehow the two cables became disconnected while you were riding? What's the best way to wire em together on a track bike, I'm thinking that twisting them together w/ electrical tape isn't a sound solution and I don't know anything about cables at all...

 

[canus]

Solder them together if you are afraid of them coming apart.

 

[SuperBlueSV]

Wire nut.

 

[frayed]

Drill a hole in the end of the plunger then safety wire around the switch housing to the closed position. Unless you want it off there completely.