Suzuki SV650 Riders Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
703 Posts
The license plate light is a separate connector from the brake lights. IIRC (I'm away from the bike and manuals ATM) the brake light is a three wire connector, 1 for tail lights, 1 for brake lights, and 1 ground. The plate light is a white connector, two wires only. (Based off of my memory of my '04)

It sounds as if you cut the regular tail light wire and wired your plate lights into that one. Normally that might work but sense you have additional resistors on the LED's for the Lite N'Boltz, you're probably not getting enough power. The simple solution is to hook your tail light back up to it's original configuration and hook your plate lights up to their proper connector.
 
1 - 1 of 1 Posts
Top