Suzuki SV650 Riders Forum banner

1 - 6 of 6 Posts
K

·
Guest
Joined
·
0 Posts
i would say no..
compleatly different frame...
you could make it fit someone put an r6 swingarm on an sv..
 

·
Premium Member
Joined
·
3,557 Posts
Anything can be made to fit anything.

All it takes is time, effort and money.

The problem you run into, besides fitting to the swingarm mount are things like shock mounting, wheelbase changes, wheel centering. Add the handling changes all this would create.

My question is....Why?
 

·
Registered
Joined
·
36 Posts
I installed a zx6r swing arm on my '02. I had to narrow the shock linkage mount on the swingarm and cut a section of the cross brace out and boxed it in. It fits right in the sv frame, even uses the same diameter pivot bolt. Looks awsome and allowed me to fit a tl1000r rear wheel with 190 rear tire, looks sick. I'm Thinking about switching to a new zx-10 swingarm even cooler looking but has similar mounting.
 

·
Registered
Joined
·
128 Posts
Discussion Starter #6
Ruefus said:
Anything can be made to fit anything.

All it takes is time, effort and money.

The problem you run into, besides fitting to the swingarm mount are things like shock mounting, wheelbase changes, wheel centering.  Add the handling changes all this would create.

My question is....Why?
Rebuilding my bike from an accident and was looking at possible options. Found a bunch of gixxer swingarms but no SV on eBay.
 
1 - 6 of 6 Posts
Top