Suzuki SV650 Riders Forum banner

1 - 4 of 4 Posts
K

·
Guest
Joined
·
0 Posts
Discussion Starter #1
I am planning on taking apart my forks to see if they are bent from my high side.
I want to take the alen bolt out of the bottom of the fork leg. I cant get my 8mm alen socket in there.
What did you guys use to remove this bolt.
 

·
Registered
Joined
·
1,022 Posts
You can get it out with a regular old 8mm allen wrench with a box wrench wrapped around the tip for leverage, easy to find at Sears for a couple bucks. Traxxion has a really nifty tool though:

http://www.traxxion.com/store/detail.asp?product_id=FHT

It fits into your normal 8mm socket.
 

·
Hall Monitor
Joined
·
2,738 Posts
I cut an 8mm allen wrench (using an abrasive cutoff wheel) so that it was about 3 or 4 inches long and slipped it into an 8mm socket. Used this extended setup to crank out the bolt using a pneumatic impact driver.

Yeah, I'm basically lazy- why bend wrenches and cuss when you can get an air compressor to do the work... ;D

Bill
 
1 - 4 of 4 Posts
Top