Suzuki SV650 Riders Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
644 Posts
Discussion Starter #1
ok.... 1st .what's the size of the first gen's fork(on the top)

2nd . why did they send me SS brake lines [BRAKING] that have SVS 03-08 written on it? i thought they were totally different ...the dealer says 00-on are the same ...

3rd . what size brackets (aftermarket) for my Buell single headlight?
Ome guys claim the forks' size varies as you go from top to bottom


PS the top of the fork is needed so i can mount THIS ;D

 

·
BannedCampCounselor
Joined
·
9,911 Posts
SV forks are 41mm, the tubes are the same for the lower triple to the top triple. (answers 1 and 3)
Its the USD forks that have the 2 different diameters in the upper legs.

2- I think you'll be ok with the lines themselves, it's the pitch on the M/C (for the banjo bolt) that I think would be more likely to be different, not so much the lines themselves. Someone should be able to confirm if the 1st gen and 2nd gen m/c's are the same thread pitch.
 

·
Registered
Joined
·
644 Posts
Discussion Starter #4
dude, a little thread happy? ;) haha

should probably delete the other two ones that you opened.

btw, that looks schweet, is it a custom jobber?
i tried editing it for the fictures and it got scr#$d !!

anyway some mod will del. it i notified them


the timer holder is from AIM motorsports and is meant to be my lil' koso holder
 

·
Registered
Joined
·
105 Posts
SV forks are 41mm, the tubes are the same for the lower triple to the top triple. (answers 1 and 3)
Its the USD forks that have the 2 different diameters in the upper legs.

2- I think you'll be ok with the lines themselves, it's the pitch on the M/C (for the banjo bolt) that I think would be more likely to be different, not so much the lines themselves. Someone should be able to confirm if the 1st gen and 2nd gen m/c's are the same thread pitch.
I think all the suzy Nissin MCs are the same thread pitch, 99+. It is when you start getting into brembo stuff that you have to worry.
 

·
Registered
Joined
·
10,246 Posts
5/8 with external res as far as I know.
 

·
Registered
Joined
·
105 Posts
sorry for the thread jack... but the calipers are 1.25 right?

jeez... i am glad i stumbled on this before putting my bitsa line kit on this weekend...
 
1 - 12 of 12 Posts
Top