Suzuki SV650 Riders Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
9,975 Posts
wouldnt be in the fork swap guide.

yes it should fit. IIRC same axle, bearings, and fork centre's are the same.
 

· Registered
Joined
·
356 Posts
Discussion Starter · #5 ·
Yeah I read through the swap guide...unfortianatley I havent found anyone that has done the same combo.
The wheel would be off an 08' 600. I checked part numbers and everything is different, but I have been told it should work?
Thanks for the help.
 

· Registered
Joined
·
9,975 Posts
part numbers mean nothing.

I can tell you just by looking at the wheel that it will have a diff part number, that doesnt mean its not gonna work.
 

· Premium Member
Joined
·
4,071 Posts
so spacers, bearings, axle can have different part numbers even if they are identical or compatible?
Yeah, part numbers don't really mean anything. It could just mean a change of color or finish or even nothing at all.

Case in point - I redid the calipers on my gsxr and I got new pad pins, since they were cheap AND very worn, and the front and rear had different numbers but were the exact same. Both calipers were even tokico's so I don't know why they had different numbers. Weird.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top