Yes, improvising is very easy. If it is just the toe peg that is. I have broke my three times. the first two times I replaced it with another factory peice which I ordered from the dealership. However, if it is the toe piece, take the shifter off, make sure you cont the number of threads showing so that you don't mess with your linkage. Drill a hole where the peg was originally, and put a 1 1/2 bolt through it. Screw a lock washeron the bolt before you put it through the hole you drilled. Then put it through the hole, and put another lock washer on and tighten it. works great, and is much stronger then the factory one.