Suzuki SV650 Riders Forum banner
front forks
1-5 of 5 Results
  1. SV650 Gen2 (03-15) Tech
    So I’m rebuilding my forks while throwing in race tech .9kg/mm springs on my 06. The service manual states to fill to 93mm while race tech states 130. Which level should I go by? Also, I weigh 200lbs and originally I was going to just use thicker 15w fork oil but with the springs should I go...
  2. Parts For Sale
    I recently high sided and the damage is minimal, but ebay isn't being helpful at the moment and most forks I can find are bent. Im mainly looking for forks, a radiator, a front fender(preferably blue) and tail plastics. Any help is appreciated, thanks
  3. Gladius forum
    I wrecked my 2013 Gladius at low speed but I am afraid I bent my Forks. Like my name says I'm not a mechanic and I am just recently learning how to work on bikes, due to my accident and low funds. I'm hoping to find someone with some experience and knowledge on this topic. Both my Forks seem to...
  4. SV Modifications and General Maintenance
    It's been 3 weeks since I replaced the stock fork internals on my '07 650N with Andreani Misano cartridges. There aren't many reviews of the kit out there (both here and on other forums/YouTube), and I want to weigh in with my thoughts to help out anyone who's considering the mod. I like to...
  5. SV650 Gen2 (03-15) Tech
    Hello all, I took the forks off my Gladius (same as the 2g SVs), and all was well up to the point of trying to pump out the old fork fluid. On one fork, I can pull the rod (component #14 in the diagram) in and out fairly easily (with a small amount of resistance towards the bottom of the...
1-5 of 5 Results
Top